108

2 Press the button.

•The camera will switch to Color Input mode and the display will alternate between the original image and the color swap image (using the previously set color).

3 Aim the camera so that the original color appears at the center of the LCD monitor and press the button.

•Only one color can be specified.

•Use the or button or turn the control dial to specify the range of colors that are swapped.

–5: Only takes the color that you want to swap

+5: Also takes colors close to the one that you want to swap

4 Aim the camera so that the desired color appears at the center of the LCD monitor and press the button.

•Only one color can be specified.

5 Press the button to complete the setting, then shoot.

z The default setting for Color Swap mode changes green into white.

z You may not obtain the expected results if you use the flash.

zThe colors specified in the Color Swap mode and the color range are retained even if the camera’s power is turned off.