Changing Playback Function Settings
Changing the●Choose [IS Mode], then press the qr buttons to choose an option.
| Image stabilization is always on. | |
| You can confirm the effects | |
Continuous | directly on the display, which | |
| makes it easier to check the | |
| composition or focus. | |
Shoot Only | Image stabilization is only active | |
at the moment of shooting. | ||
| ||
| Image stabilization only counters | |
Panning | up and down motion. This option | |
is recommended for shooting | ||
| ||
| objects moving horizontally. |
•If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
•When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically.
Changing Playback Function Settings 
You can adjust the settings in the 1tab by pressing the 1button (p. 45).
Choosing the Image that First Displays in Playback
● Choose [Resume], then press the qr buttons to choose an option.
Last seen | Resumes with the image last | |
viewed. | ||
| ||
Last shot | Resumes with the most | |
recently shot image. | ||
|
149