146
You can adjust the settings in the 1 tab by pressing the 1 button (p.48).
Selecting the Image that First Displays
in Playback
●Select [Resume], then press the qr buttons
to select an option.
In the 3 tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation with your recorded sounds.
Change Sounds
●Select [Sound Options], then press the m
button.
●Press the op buttons or turn the  dial to
select an option.
●Press the qr buttons to select a setting.
Changing the Start-up Screen
●Select [Start-up Image], then press the m
button.
●Press the qr buttons to select a setting.
Changing Playback FunctionsLast shot Resumes with the most recently shot
image.
Last seen Resumes with the image last viewed.
Changing the Start-up Image or Sound1 Preset sounds.
2
You can register your sounds using the supplied
software (ZoomBrowser EX/ImageBrowser) (p.147).
No start-up image.
1 Preset images.
2 You can register your images.