Changing Shooting Function Settings

Changing Distance Units

You can change the distance units that display in the zoom bar (p. 24) and the MF indicator (p. 87) from m/cm to ft/in.

∆Choose [Distance Units], then press the qr buttons to choose [ft/in].

Changing Shooting Function Settings

If you set the mode dial to G, you can change the settings in the 4 tab (p. 47).

Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (p. 168).

Switching the Focus Setting

The camera focuses on whatever it is aimed at even when the shutter button is not pressed. However, you can set it so that the camera only focuses when the shutter button is pressed halfway.

∆Choose [Continuous AF], then press the qr buttons to choose [Off].

Since the camera focuses continuously until On you press the shutter button halfway, it

allows you to shoot without missing photo opportunities.

Off The camera does not continuously focus, thereby conserving battery power.

149