Using the Wink Self-Timer

Point the camera at the subject and press the shutter button fully. The camera will shoot approximately two seconds after it detects a wink.

Choose .

∆Follow Steps 1 – 2 on p. 55 to choose , then press the l button.

∆Press the qrbuttons or turn the Âdial to choose , then press the m button.

Compose the shot and press the shutter button halfway.

∆Confirm that a green frame appears around the face of the person who will wink.

ress the shutter button fully.

The camera will enter shooting stand-by, and [Wink to take picture] will appear on the screen.

Face the camera and wink.

The shutter will release approximately 2 seconds after a wink is detected from the person with a frame around the person’s face.

∆To cancel the countdown, press the pbutton.

What if a wink is not detected?

•Wink a bit slowly.

•A wink may not be detected if eyes are covered by hair or a hat, or when wearing glasses.

Changing the number of shots

For the screen in Step 1, press the l button, then press the op buttons to change the number of shots. Press the l button to accept the setting.

61