Canon VC-C4R Loading the Batteries into the Wireless Controller, Replace the battery cover

Before You Use the Product

Loading the Batteries into the Wireless Controller

The wireless controller requires two AA-type batteries.

1.Remove the battery cover.

2.Insert the batteries.

■ Taking care that the poles (+ and -) are correctly positioned.

3. Replace the battery cover.

WARNING

Observe the following precautions when handling batteries.

Failure to do so could result in the batteries bursting or emitting heat, sparks or corrosive fluid.

●Do not throw the batteries into a fire, and do not heat, short-circuit or attempt to disassemble the batteries.

●Do not attempt to recharge the batteries.

ENGLISH

Operable Range of the Wireless Controller

Use the wireless controller within the range described below, facing it toward the sensor for the wireless controller. The operable range of the wireless controller varies depending on the amount of charge remaining in the batteries and interference from other objects. (This applies equally to the VC-C4R.)

5m

(16 ft. 4 7/8 in.)

90° 30°

90°

30°

15