Erasing Unwanted Parts of an Image (Copy Stamp Function)

You can correct an image by pasting a section copied from another part of the image to an unwanted part of the image.

1Follow steps 1 to 3 in “Manually Erasing Dust (Repair Function)” (p.97).2 Specify the section to be copied.

O Click on the section that is to be the copy source while holding down the <option> key.

O To change the section that is to be the copy source, perform the operation above again.

O To fix the position of the copy source, checkmark [Fix Copy Source position].

3 Correct the image.

O Click or drag on the section you want to correct on the image. [+] in the window indicates the copy source and [] indicates the copy destination.

¿The copied image is pasted in the position to which it was dragged.

OFor [Pen type], you can select from [Brush] (the pasted image’s borders simulate a brush) and [Pencil] (the pasted image’s borders are sharp).

4Click the [OK] button to return to the main window.

¿The [ ] mark (p.106) is displayed on a corrected image.

Saving Editing Results

Saving Editing Content to an Image

All the contents (recipe) adjusted with the tool palette (p.85 to p.92) as well as the trimmed range (p.93) and dust-erasure (p.95 to p.99) information can be saved to a JPEG or TIFF image, or to a separate JPEG or TIFF image.

Select the [File] menu desired item.

¿Your adjustments are saved to the image.

99