Making Corrections

You can make corrections to any of the four aberrations as below, either one at a time or simultaneously.

OPeripheral illumination

ODistortions

OChromatic aberration (color fringing which occurs in the periphery of an image)

OColor blur (blue or red color blur which sometimes occurs at the edge of the highlighted area of an image)

1Insheet.the tool palette, select the [NR/Lens/ALO] tab2Click the [Tune] button.

¿The [Lens aberration correction] window appears.

3Checkmark the items to be corrected.

¿The image is corrected and redisplayed.

OCheck the results of corrections to peripheral illumination or distortions in the full view.

Check the results of corrections to chromatic aberration and color blur by clicking the area on the image you want to check. In the top right of the window, the area is displayed at 200% in the enlargement display section (p.114).

OYou can lessen the degree of correction by moving the slider to the left for the item you want to correct.

OYou can respectively correct red chromatic aberration with the [R] slider of the [Chromatic aberration] or blue chromatic aberration with the [B] slider.

4Click the [OK] button.

¿The [Lens aberration correction] window closes and the result of the corrections is applied to the image in the edit window and the image is redisplayed.

¿The result of the settings of the [Lens aberration correction] window is also displayed in the tool palette.

¿In the main window, the [ ] mark is displayed on the image to indicate the lens aberration corrections (p.106).

60