Specify the section to be copied.
O Click on the section that is to be the copy source while holding down the <option> key.
O To change the section that is to be the copy source, perform the operation above again.
O To fix the position of the copy source, checkmark [Fix Copy Source position].
Erasing Unwanted Parts of an Image (Copy Stamp Function)

You can correct an image by pasting a section copied from another part of the image to an unwanted part of the image.

1Follow steps 1 to 3 in “Manually Erasing Dust (Repair Function)” (p.64).

2

3 Correct the image.

O Click or drag on the section you want to correct on the image. [+] in the window indicates the copy source and [] indicates the copy destination.

¿The copied image is pasted in the position to which it was dragged.

O For [Pen type], you can select from [Brush] (the pasted image’s borders simulate a brush) and [Pencil] (the pasted image’s borders are sharp).

4Click the [OK] button to return to the main window.

¿The [ ] mark (p.106) is displayed on a corrected image.

Transferring a RAW Image to Photoshop

A RAW image can be converted to a TIFF image (16bit) and transferred to Photoshop.

Select the [Tools] menu [Transfer to Photoshop].

¿Photoshop starts up and the transferred image is displayed.

A single image can be transferred at a time

Only one image can be transferred at a time. To send multiple images at a time, refer to p.82.

O Compatible versions of Photoshop are CS or later.

OTransferred images are automatically converted to TIFF images (16bit) to which an ICC profile (p.118) is added. The ICC profile contains information about [Preferences] (p.75) or work color space set for each image as described below and the appropriate color information is relayed to Photoshop.

OWhen you quit Photoshop, only the original RAW image remains, and the transferred image will disappear. Saving the transferred image as a separate image in Photoshop is highly recommended.

Setting Work Color Space

A different work color space (p.119) from the default settings (p.75) can be set for each image.

Select the [Adjustment] menu [Work color space] color space to be set.

A color space set individually does not change even when the default setting is changed

If you set an image with a color space different to the default setting and then subsequently change the default color space setting (p.75), this default setting will not be applied and the individually set color space will remain.

The color space of a RAW image can be changed freely as many times as required

Since only the image processing conditions information changes, the color space of a RAW image can be changed at any time.