Canon 8152B005, 8153B001, VIXIA HF-R40, VIXIA HFR42 Searching for Access Points, 133), 136), as necessary, 1[WPS: Button] method, [WPS: PIN Code] method, •Make sure the router’s WPS function is activated

[Search for Access Points] method. Refer also to the router’s instruction manual.

1[WPS: Button] method

Press and hold the WPS button on the wireless router.

•Depending on the router, the amount of time required may differ.

•Make sure the router’s WPS function is activated.

[WPS: PIN Code] method

From a computer or similar device connected to the wireless router, use the Web browser to open the router’s WPS settings screen. After the 8-digit PIN code appears on the camcorder’s screen, enter it into your router’s WPS settings screen.

2Within 2 minutes, touch [OK] on the camcorder’s screen.

•The camcorder will connect to the wireless router.

•You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress.

•After the connection is established, continue using the function you were previously using. For details, refer to the procedure in Viewing and Changing Wi-Fi Settings (A142), Sharing Your Recordings

Using Web Services (A133) or layback on a Computer (A136) as necessary.

Searching for Access Points

The camcorder will automatically detect access points in the vicinity. After you select the desired access point, you simply enter the password (encryption key) to connect the camcorder.

To enter text for the various settings, use the virtual keyboard (A140).

1 Note the access point’s network name (SSID) and encryption key.

2When the detected access points appear, touch the desired access point and then touch [OK].

You can touch [Í] and [Î] to go through the detected access points.

3In the field for encryption key, enter the encryption key and then touch [OK].

If the access point selected in step 2 did not have a [C] icon, this step is not necessary.

Wi-Fi Functions Š 139