In step 2, if you selected [OPEN NONE], this step is not necessary.

4Touch [Automatic] or [Manual] to select how to obtain the IP address.

If you selected [Automatic], proceed to step 11.

5For both the IP address and subnet mask areas, touch [0.0.0.0] and then touch [Í]/[Î] to change the value.

Touch and next field and change the value, as necessary.

6 Touch [OK] and then touch [Next].

7In the default gateway area, touch [0.0.0.0] and then touch [Í]/ [Î] to change the value.

Touch and next field and change the value, as necessary.

8 Touch [OK] and then touch [Next].

9For both the primary and secondary DNS server areas, touch [0.0.0.0] and then touch [Í]/[Î] to change the value.

Touch and next field and change the value, as necessary.

10 Touch [OK] and then touch [Next].

11 Touch [OK].

•After the connection is established, continue using the function you were previously using. For details, refer to the procedure in Viewing and Changing Wi-Fi Settings (A142) or Sharing Your Recordings Using Web Services (A133), as necessary.

NOTES

•The Wi-Fi functions available and the setup method will vary depending on the specifications and characteristics of the Wi-Fi network you want to use.

Viewing and Changing Wi-Fi Settings

When the camcorder is connected to an access point or to a Wi-Fi- enabled device, you can view the Wi-Fi connection settings and even change them, if necessary.

Operating modes:

SCN

Wi-Fi Functions Š 141