Do not disconnect the power source. Do not disconnect the USB cable unless you first use the computer to safely end the connection.

-When the camcorder is in mode and is connected to the computer with the supplied USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source while this message appears may result in permanent loss of the recordings in the camcorder. Use the computer’s Safely Remove Hardware function to end the connection and disconnect the USB cable before using the camcorder.

-To transfer files to the camcorder, power the camcorder using the compact power adapter and only then connect it to the computer using the supplied USB cable.

File name error

-The folder and file numbers have reached their maximum value. Set >q>[File Numbering] to [Reset] and delete all the MP4 movies (A57) and photos (A58) on the memory card or initialize it (A33).

Initialize only using the camcorder

-There is a problem with the file system that prevents accessing the selected memory. Initialize the memory with this camcorder (A33).

LCD Screen has been dimmed

Use the [LCD Backlight] setting to change the brightness

- Change the

>

>[LCD Backlight] setting to [Normal] or [Bright].

May not be possible to record movies on this memory card

-You may not be able to record movies on a memory card without a Speed Class rating or with one rated SD Speed Class 2. Replace the memory card with one rated SD Speed Class 4, 6 or 10.

Mem. Card Number of scenes already at maximum

-The memory card already contains the maximum number of AVCHD scenes (3,999 scenes); no further scenes can be copied onto the memory card. Delete some scenes (A56) to free some space.

Mem. Card Unable to recognize the data

-The memory card contains scenes recorded using a video configuration that is not supported (PAL or SECAM). Play back the recordings in the memory card with the device originally used to record them.

Memory card cover is open

- After inserting a memory card, close the memory card slot cover.

Memory card is full

-The memory card is full. Delete some recordings (A56, 58) to free some space or replace the memory card.

Memory card is write-protected

- The LOCK switch on the memory card is set to prevent accidental erasure. Change the position of the LOCK switch.

168 Š Additional Information