Copying Recordings to a Memory Card

To select individual photos

1Touch on the individual photos you want to copy.

•A checkmark O will appear on the photos you touch. The total number of selected photos will appear next to the o icon.

•Touch a selected photo to remove the checkmark. To remove all checkmarks at once, touch [Remove All] [Yes].

1342 After selecting all the desired photos, touch [OK]. Options

[Select] Select individual photos to copy. [All Photos] Copy all the photos.

IMPORTANT

•Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not open the double memory card slot cover.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the camcorder’s operating mode.

•When copying photos onto an Eye-Fi card in memory card slot Y, photos will be uploaded automatically if you are within the range of a configured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card (0142).

NOTES

•In the following cases, you will not be able to copy recordings to the memory card:

-If the double memory card slot is open.

-If the LOCK switch on memory card Y is set to prevent writing.

-If there is no memory card in memory card slot Y.

•If there is not enough space on memory card Y, as many photos as possible will be copied before stopping the operation.