Preparing the Camcorder

To use the wireless controller

Point the wireless controller at the camcorder’s remote sensor when you press the buttons.

•You can rotate the LCD panel 180 degrees to use the wireless controller from the front of the camcorder.

•When you operate the wireless controller, the camcorder's tally lamp will illuminate.

29

NOTES

•When the camcorder cannot be operated with the wireless controller, or when it can only be operated at very close range, replace the battery.

•The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight.

Using a Tripod

You can mount the camcorder on a tripod but do not use tripods with mounting screws longer than 6.5 mm (0.26 in.) as this may cause damage to the camcorder.