
Changing the Remote Sensor Mode
Two remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby.
To change the remote sensor mode of the camcorderChange the [WIRELESS REMOTE] setting of the custom function file (
Press the ZOOM T button and keep it pressed for over 2 seconds to change the wireless controller to mode 2. Press the ZOOM W button and keep it pressed for over 2 seconds to change the wireless controller to mode 1.
If you have set the camcorder to mode 1, press the ZOOM W button for mode 1.
The wireless controller returns to mode 1 when you replace the batteries. Change the mode if necessary.
Make sure that the camcorder and wireless controller are set to the same mode. Display the camcorder’s mode by pressing any button on the wireless controller (except the REMOTE SET button) and set the wireless controller’s mode to the same mode. Change the batteries if the wireless controller still does not work.
102