Canon XG A1 Resetting a Custom Function File, Activating a Custom Function File, Copying a Custom Function File to the Memory Card, 3.From the bottom bar select [RESET]

Resetting a Custom Function File

1.Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION] submenu.

2.From the column on the left select the custom function file you want to reset.

3.From the bottom bar select [RESET].

4.Select [OK], press the SELECT/SET dial and close the menu.

Activating a Custom Function File

Even if you define a custom function file, as long as you do not activate it the camcorder will function according to its default settings.

1.Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION] submenu.

2.From the column on the left select the custom function file you want to activate.

3.From the bottom bar select [ APPLY THIS SET].

4.Select [ACTIVE] and press the SELECT/SET dial

will appear next to the custom function file currently activated.

Copying a Custom Function File to the Memory Card

1.Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION] submenu.

2.From the column on the left select the custom function file you want to copy to the memory card.

3.From the bottom bar select [SAVE TO CARD].

4.Select the destination file on the memory card [ 1] - [ 3].

5.Select [OK], press the SELECT/SET dial and close the menu.

When the operation is finished, "TASK COMPLETED" will appear on the screen.

Loading a Custom Function File from the Memory Card

1.Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION] submenu.

2.From the column on the left select the custom function file to which you want to load the settings from the memory card.

3.From the bottom bar select [READ FROM CARD].

4.Select the source file on the memory card [ 1] - [ 3].

5.Select [OK], press the SELECT/SET dial and close the menu.

When the operation is finished, "TASK COMPLETED" will appear on the screen.

80