
2.Open the menu and select [SIGNAL SETUP]. Select [SDI OUTPUT] and set it to [ON].
3.From the same [SIGNAL SETUP] submenu select [SDI SPEC.]. Select [AUTO] or [SD LOCKED] to match the video output you wish to use.
4.Close the menu.
2 Using the COMPONENT OUT TerminalOpen the terminal cover |
|
| |
| yellow |
| |
Set the switch to the | white | VIDEO | |
| |||
A/V1 position | L | ||
| |||
Signal flow | red | AUDIO | |
| R | ||
|
| ||
Signal flow | INPUT |
| |
red | Pr/Cr | ||
|
| ||
(supplied) | blue | Pb/Cb | |
| |||
| green | Y |
Select the appropriate component video signal depending on the TV or monitor you connect.
Open the menu and select [SIGNAL SETUP]. Select [COMP. OUT], select a setting option and close the menu.
3 Using the HDV/DV TerminalDV Cable (optional)
Open the terminal cover
•When connecting the camcorder to a monitor TV that supports DV, you may need to carry out a procedure on the TV to recognize the camera. Refer to the instruction manual of the TV or monitor.
94