Erasing Images

You can erase images one at a time or all at once.

Be careful when erasing images. Erased images cannot be recovered.

Erasing a still image that had a custom preset file embedded (recorded with the [ON+CP DATA] setting) will erase the image and the embedded custom preset file.

Protected images ( 123) cannot be erased.

Erasing a Single Image

1.Select the image you wish to erase.

2.Press the SELECT/SET dial to open the still image operations menu.

In mode, the menu appears when you press the SELECT/SET dial while you are reviewing a still image, or if you press the SELECT/SET dial immediately after recording an image.

3.Select [IMAGE ERASE].

4.Select [ERASE].

The image is erased and the previous image appears.

5. Select [CLOSE] to close the menu.

Erasing All Images

MENU

CARD OPERATIONS

ERASE ALL IMAGES

( 25)

 

 

1.Open the menu and select [CARD OPERATIONS].

2.Select [ERASE ALL IMAGES].

3.Select [YES] and close the menu.

All still images except the protected ones are erased.

122