[PED] Master Pedestal

Adjust the master pedestal level in the range -9 to +9.

[SET] Setup Level

Adjust the setup level in the range -9 to +9.

•Depending on the value set for the master pedestal [PED], the setup level may not be able to take a negative value. In that case, adjusting the setup value within a certain value range will have no effect.

[SHP] Sharpness

Adjust the sharpness level in the range -9 to +9.

[HDF] Horizontal Detail Frequency

You can select from [HIGH], [MIDDLE] or [LOW].

[DHV] Horizontal/Vertical Detail Balance

Adjust the horizontal/vertical detail balance in the range -9 (only horizontal) to +9 (only vertical).

[COR] Coring

Adjust the detail noise level in the range -9 to +9.

[NR1] Noise Reduction 1

You can select from [OFF], [HIGH], [MIDDLE] or [LOW].

•With the [HIGH] setting moving subjects may leave a trailing afterimage.

•When picture noise is already low due to the gain settings, the noise reduction function may not be noticeable.

[NR2] Noise Reduction 2

Results in an effect similar to applying the skin detail function over the whole picture. You can select from

[OFF], [HIGH], [MIDDLE] or [LOW].

• Unlike with the NR1 setting, a trailing afterimage will not appear.

[CMX] Color Matrix

You can select from [NORMAL], [CINE1] or [CINE2].

[CGN] Color Gain

Adjust the color saturation level in the range -50 to +50.

E

Customization

77