Preparation
20
E
Using the Wireless Controller/Tally Lamps
The supplied wireless controller can operate the
camera from a distance of up to 16 feet (5 m).
Point it at either of the camera’s remote sensors
while you press the buttons.
The tally lamps light up to let you know that the
camera is in range and responding to your
commands.
There are five functions which can only be
operated using the wireless controller:
• Special playback (p. 53)
• TV-screen displays (p. 80)
• Data code on/off (p. 54)
• Photo search (p. 55)
• Self-timer (p. 42)
Insert two AAAbatteries, following the = and -
markings. Be careful not to reverse the polarity of
the batteries.

Inserting batteries

Notes:
• When using the wireless controller in brightly lit places or outdoors, the effective range will be less.
• The camera may have difficulty picking up the remote control signals at extremely close range.
• Do not leave the controller exposed to direct sunlight, or in hot or humid places.
• When the batteries run out, replace them both together.
• Make sure the shoulder strap does not obstruct the tally sensors.