Canon XL1 - page 21

Preparation
21
E
Turning off the tally lamps
The tally lamps let you know that the camera is
recording. However, the flashing of the front lamp
may be reflected into the lens during close-up
recording, or when recording through glass.
You may therefore decide to turn them off.
TALLY LAMP••OFF
1. Open either the camera menu or the VCR menu, and point the arrow at TALLYLAMP.
2. Select the OFF setting and close the menu.
• The tally lamps no longer flash during recording, but they will still light up when the camera receives
a signal from the wireless controller.
SENSOR••••••OFF
The remote sensors can be turned off to prevent interference from other Canon wireless controllers being
used nearby.
Turning off the remote sensors
1. Open either the camera or the VCR menu, and point the arrow at SENSOR.
2. Select the OFF setting and close the menu.
• appears in the viewfinder.
S
OFF
(see p. 18)
(see p. 18)