Recording
E
42
Setting the Self-Timer
1. Press the wireless controller’s SELFTIMER button.
• SELF TIMER appears in the viewfinder.
2 Press the wireless controller’s START/STOPbutton.
• The camera starts to record after a 2 second countdown period (or after 10 seconds if you press the
start/stop button on the camera). The time remaining counts down in the viewfinder (e.g. “5 sec”).
• SELF TIMER disappears from the viewfinder when recording begins.
3. Press the START/STOPbutton to end recording.
• In photo mode, set the self-timer in a similar way, but press the PHOTO button in place of the
start/stop button. The focus and exposure are set before the countdown is complete and the green
mark is displayed.
Notes:
• Initially the tally lamps flash once a second, then just before recording starts they flash more quickly for a
few seconds before the camera starts to record.
• To cancel the self-timer press the SELF TIMER button once more before recording. Once the countdown
has begun, press the SELF TIMER button to turn it off.
• Cancel the self-timer at any stage by turning the power off or pressing the STANDBYbutton.
• If you press the SELF TIMER button when the recording displays have been turned off (p. 24), the self
timer display does not appear in the viewfinder, until you press the start/stop button to start the
countdown.
PHOTO
SELF TIMER
W T
ZOOM
START/
STOP