Preparation
8
EAny lens bearing the mark can be used with this camcorder.
1. Remove the dust cap from the lens and the body cap from the camcorder.
2. Align the red dot on the camera body with the mount positioning point (the red dot) on the
lens, then turn the lens clockwise until it clicks and locks into place.
Mounting the lens
1. Slide and hold the LENS RELEASE switch and turn the lens counter-clockwise until it
stops. Then, remove the lens from the camera body.
2. When you are not using the lens or camera, be sure to replace the dust cap and body cap.
Removing the lens
LENS RELEASE
Mounting and Removing XL Lenses