Reading a Custom Preset File from a Still Image

With the custom function [PHOTO BUTTON] ( 104) you can select to save the custom preset settings

currently in use along with a still image recorded in mode (simultaneous recording, 122). This is very useful when you want to load the custom preset file later by selecting the still image captured from a specific scene.

1. Select the still image that contains the custom preset file you want to read.

Use the + / – buttons to move between the still images.

2.Open the menu, select [CUSTOMIZE] and then select [META DATA CP].3.Select [ CARD CAMERA] from the column on the left.

4.From the bottom bar, select [ SELECT POSITION] and select the preset number under which you want to store the file on the camcorder.

5.Select [ EXECUTE] and in the confirmation screen select [EXECUTE] to load the file.

6.Close the menu.

Custom preset files 7 to 9 are predefined settings designed for specific scenes.

-These 3 custom preset files are protected and, as long as the protection is not removed, cannot be overwritten.

-Even if you deleted or changed the sample custom preset files, you can reset them to the original

values by resetting all the camcorder’s settings. Open the menu and select [S STEM SETUP/ ]. Select [RESET ALL] and select [YES] in the confirmation screen.

-After resetting custom preset files 1 to 6 with the [ RESET] option, they will all contain the same default settings.

Custom Preset [7 VIDEO.C]

For playback on a consumer-level monitor.

Custom

[BLK] = [PRESS], [PED] = -2, [SET] = -2

 

 

Preset [8

INE.V]

For playback on a monitor TV with a film-like feel.

 

 

[GAM] = [CINE1], [KNE] = [LOW], [BLK] = [STRETCH], [SHP] = -4,

 

 

[CMX] = [CINE1], [CGN] = -20, [CPH] = 5, [RBM] = -5, [GRM] = -5

 

 

[GBM] = -5, [BRM] = 5, [BGM] = 12

Custom Preset [9

INE.F]

For video transfer to film.

 

 

[GAM] = [CINE2], [KNE] = [LOW], [BLK] = [STRETCH], [SHP] = 6,

 

 

[CMX] = [CINE2], [RGN] = -8

*All other settings are left at their neutral values.

100