Canon XL H1S „AUDIO SETUP, [OUTPUT LEVEL], „CARD OPERATIONS, Additional Information

If you record in both SP and LP modes on the same tape, the playback picture may become distorted, and the time code may not be written correctly.

If you play back on this camcorder, a tape that was recorded in LP mode with another digital device or vice versa, the picture and sound may become distorted.

„AUDIO SETUP

Menu item	Setting options
AUD.M.SET	CH 1/2 , CH 3/4 , MIX/FIXED, MIX/VAR.			–			–	–	59
MIX BALANCE	1/2		3/4	–			–	–	90
DV AUDIO	16bit, 12bit				1		–	–	57
MONITOR SEL.	NORMAL, LINE OUT					–	–	–	90
WIND SCREEN	ON	, OFF				–		–	57
MIC SENSIT.	NORMAL, HIGH					–		–	57
XLR 1 TRIM	+12dB, +6dB, 0dB, -6dB, -12dB					–		–	59
XLR 2 TRIM
OUTPUT LEVEL	1Vrms, 2Vrms							–	90
XLR ALC LINK	LINK, SEP					–		–	59
AUD.LIMITER	ON, OFF					–		–	59

1Available only when recording in standard definition (SD).

[OUTPUT LEVEL]: Select the amplitude of the audio output signal.

„CARD OPERATIONS

Menu item		Setting options
ERASE ALL	PRINT ORD	NO, YES	–	–	–	132
ERASE ALL IMAGES		NO, YES	–	–	–	129
INITIALIZE		AN EL, INITIALIZE, MPL.INIT.	–	–	–	131
After opening the menu from the index screen:
PROTECT		–	–	–	–	130
PRINT ORDER		–	–	–	–	132
After pressing the SET button:
IMAGE ERASE		AN EL, ERASE	–	–	1	129
PROTECT		OFF, ON	–	–	1	130
PRINT ORDER		0 COPIES	–	–	–	132
SLIDESHOW		CANCEL, START	–	–	–	127

1 Available only when you press the SET button within the time set for the [CAMERA SETUP] [REVIEW] setting (or

immediately after recording if it is set to [OFF]).Additional Information

135