Audio Output

Selecting the Audio Channel

You can select the channel for audio signal output from the CH1/CH2 and the (headphone) terminals.

Repeatedly press the AUDIO OUTPUT CH button to change the audio channel.

• Pressing the button will cycle between the audio channels in the following order: CH1/CH2

CH1/CH1 CH2/CH2 ALL CH/ALL CH CH1/CH2.

• During playback of a tape recorded with 4-channel audio (using another device) or while recording external video with 4-channel audio from the HDV/DV terminal, the output channels will be: CH1·3/CH2·4

CH1·3/CH1·3 CH2·4/CH2·4 ALL CH/ALL CH.

Selecting the Audio Output Level

You can boost the level of the audio output signal from the

CH1/CH2 terminals from 1 Vrms to

2 Vrms (+6 dB).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[AUDIO

 

 

 

 

 

 

MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO SETUP

 

 

UTPUT LEVEL•••1Vrms

 

 

 

 

 

(

 

33)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Open the menu and select

 

SETUP]. Select [OUTPUT LEVEL], select a setting

option and close the menu.

 

 

 

 

 

 

 

 

Selecting the Audio Monitor

MENU

AUDIO SETUP

 

AUD.M.SET•••CH 1/2

 

(

33)

 

 

 

 

 

 

 

 

Open the menu and select [AUDIO SETUP]. Select [AUD.M.SET], select a setting option and close the menu.

•You can also select the audio monitor using the wireless controller.

•If you selected [MIX/VAR.], adjust the mix balance with the [MIX BALANCE] setting or using the MIX BALANCE buttons on the wireless controller.

90