Preparing the Camcorder
Adjust the viewfinder
•Set the camcorder to TAPE CAMERA mode. Extend the viewfinder straight out, then adjust the viewfinder focusing lever to suit your eyesight.
•Rotate the viewfinder to an angle that allows you to view comfortably. Store the camcorder with the viewfinder flush with the body of the camcorder.
•To view with the viewfinder, make sure the LCD panel is either turned so that the subject can monitor viewing, or totally closed with the screen facing inwards.
Prepare the lens cap
•Attach the cord to the lens cap, and pass the grip belt through the loop on the cord.
•Hook the lens cap on to the grip belt while you are recording, and place it over the lens when you have finished.
Fasten the grip belt
E
• Release the Velcro fastening and hold the camcorder with your right hand while you adjust the belt with your left. Your index finger should reach the zoom control and photo button, and your thumb should reach the start/stop button comfortably.
Information | Additional |
