![](/images/new-backgrounds/1292174/292174253x1.webp)
?The image cannot be erased.
•The image is protected ( 102).
•You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch.
E
Miscellaneous
Problem
?The wireless controller doesn’t work.
?The power indicator is flashing.
?The camcorder malfunctions.
?The DV cable is connected correctly, but there’s nothing in the display.
?The camcorder becomes warm during use.
Cause and/or what to do about it
•The remote sensor mode is set to
OFFB in the menu ( 46).
•The remote sensor modes of the wireless controller and the camcorder
itself are different ( 46).
•The batteries are dead or not inserted.
•Check the screen displays ( 132).
•External interference may cause the camcorder’s microprocessor to malfunction temporarily. If random letters appear in the display or if normal operation is interrupted, remove and then replace the power source.
•Remove the cable and then reconnect it or turn the power off and back on again.
•This is not a malfunction.
Information | Additional |