How much power is left?
The indicator in the display shows you approximately how much charge the battery pack has left:
Notes:
•“CHANGE THE BATTERY PACK” appears in the display for 4 seconds when the power is completely exhausted. The empty battery mark then appears and starts to flash. The power indicator light also flashes.
•The indicator is not constant — different levels will be shown when you subject the battery pack and camcorder to different conditions.
100% ↓ 
75% ↓ 
50% ↓ 
25% ↓
CHANGE THE BATTERY PACK 0% ↓
E
When to recharge
You can recharge a lithium ion battery pack whenever it is convenient. Unlike a conventional battery pack, it does not have to be fully discharged first. However, as the battery pack will naturally discharge itself over time, it is best to charge it the same day you plan to use it, or the day before.
Taking care of the battery pack
Always attach the terminal cover.
•Do not allow any metal objects to touch the terminals, as this can cause a short circuit and damage the battery pack. Attach the terminal cover whenever the battery pack is not being used.
B | D |
Keep the terminals clean.
•The camcorder adapter or battery pack will not work properly if the terminal are dirty. Attach the terminal cover whenever the battery pack is not being used.
Storing the battery pack
•If you do not use a battery pack for a period of more than a few months any remaining charge may cause damage to the battery pack, and reduce usage time. To prevent damage therefore, aim to use a battery pack’s complete charge before storage. See the optional battery pack’s instructions for further details.
Information | Additional |
