Canon ZR65 MC, ZR60, ZR70 MC instruction manual Connect the camcorder to the digital video device

E

Recording from Digital Video Devices (DV Dubbing)

You can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality.

❍When recording from digital video devices, make sure that “AV \ DV” is not displayed on the screen. If “AV \ DV” is displayed, change the setting

( 93).

❍Anomalous signals sent from the connected device may be recorded as anomalous picture (although it may not appear so on the screen), or it may not be recorded at all.

❍Copyright protected signals cannot be recorded.

❍Blank sections may be recorded as anomalous picture.

❍If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again.

❍You can connect only one device with the DV cable.

❍ You can use the camcorder for playback and recording without reconnecting the DV cable.

CAMERA PLAY (VCR) CARD CAMERA CARD CAMERA

Editing

1.Connect the camcorder to the digital video device.

See Connecting a Digital Video Device ( 88).

2.Set the camcorder to PLAY (VCR) mode and load a blank cassette.

“DV IN” appears.

3.Connected device: Load the recorded cassette.

4.Press the REC PAUSE button on the wireless controller.

AV INSERT AVDV REMOTE SET

REC

PAUSE

WIRELESS CONTROLLER WL-D79

In record pause mode and during recording, you can check the picture on the screen

5.Connected Device: Play back the tape.

6.Press the PAUSE a button on the wireless controller when the scene you wish to record appears.

7.Press the STOP 3 button on the wireless controller to stop recording.

•Press the PAUSE a button on the wireless controller to pause recording.

•Press the PAUSE a button again to restart recording.

8.Connected Device: Stop playback.

ZEROSET	REW	PLAY		FF
MEMORY
12bit		STOP
AUDIO OUT
AUDIO DUB.	PAUSE	SLOW		2
	AV INSERT	AV	DV	REMOTE SET
ZEROSET	REW	PLAY		FF
MEMORY
12bit		STOP
AUDIO OUT
AUDIO DUB.	PAUSE	SLOW		2
	AV INSERT	AV	DV	REMOTE SET

90