CD:

Push up/down to:

–Skip albums (push)*3.

–Skip albums continuously (push and hold)*3.

Push left/right to:

–Skip tracks (push).

–Skip tracks continuously (push, then push again within about 2 seconds and hold).

–Reverse/fast-forward a track (push and hold).

Radio:

Push up/down to:

–Receive stored station. Push left/right to:

–Tune in stations automatically (push).

–Find a station manually (push and hold).

EDisc slot page 5

To insert the disc.

FDisplay windowGZ (eject)/ANGLE button page 5

To eject the disc/slide down the front panel (press); angle the front panel in 3 positions (press and hold).

H (front panel release) button page 5ISOURCE button

To power on; change the source (Radio/CD/ AUX)*2.

JDSPL (display) button page 8

To change display items.

KRESET button (Location behind the front panel) page 4

LSCRL (scroll) button

To scroll the display item.

MOFF button

To power off; stop the source.

NAUX input jack page 11

To connect a portable audio device.

OReceptor for the card remote commander

The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 4).

qh MENU button To enter menu.qj ENTER button To apply a setting.qk </, (SEEK –/+) buttons

The same as pushing the multi way encoder left/right on the unit.

Setup, sound setting, etc., can be operated by < ,.

ql VOL (volume) +/– button To adjust volume.w; ATT (attenuate) button

To attenuate the sound. To cancel, press again.

wa SOUND button

To enter sound setting.

ws LIST/CAT*1 button To list up.wd M/m (+/–) buttons

The same as pushing the multi way encoder up/down on the unit.

Setup, sound setting, etc., can be operated by

M m.

wf Number buttons

CD:

(1): REP page 8

(2): SHUF page 8

(6): PAUSE

To pause playback. To cancel, press again.

Radio:

To receive stored stations (press); store stations (press and hold).

*1 When the SAT tuner is connected.

*2 In the case of a CD/MD changer, HD radio tuner or SAT tuner being connected; when (SOURCE) is pressed, the connected device (“MD,” “HD,” “XM” or “SR”) will appear in the display, depending on which device is connected. Furthermore, if (MODE) is pressed, you can switch the changer, HD radio tuner band or SAT tuner band.

*3 When an MP3/WMA/AAC is played.

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

7