Tuning automatically

1Select the band, then push the multi way encoder left/right to search for the station.

Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.

Tip

If you know the frequency of the station you want to listen to, push and hold the multi way encoder left/right to quickly locate the approximate frequency, then push the multi way encoder left/right repeatedly to fine adjust to the desired frequency (manual tuning).

Receiving a station through a list— LIST

You can list up the frequency.

1Select the band, then push (LIST) up.

The preset list appears.

2Rotate the multi way encoder until the desired station appears.3Press the multi way encoder to receive the station.

The display returns to normal reception mode.

Other functions

Changing the sound settings

Adjusting the sound characteristics1Press the multi way encoder.

2Rotate the multi way encoder until the desired menu item appears, then press it.

3Rotate the multi way encoder to select the setting, then press it.

The setting is complete.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

The following items can be set (follow the page reference for details):

“z” indicates the default settings.

EQ3 parametric

To select an equalizer type: “Xplod” (z), “Vocal,” “Edge,” “Cruise,” “Space,” “Gravity,” “Custom” or “off.”

DSO*1

To select the DSO mode: “1,” “2” (z), “3” or “off.” The larger the number, the more enhanced the effect.

Balance

To adjust the balance between the right and left speakers: “R10” – “0” (z) – “L10”

Fader

To adjust the balance between the front and rear speakers: “F10” – “0” (z) – “R10”

Subwoofer

To adjust the subwoofer volume: “+10” – “0” (z) – “–10”

(“– ∞” is displayed at the lowest setting.)

LPF (Low Pass Filter)

To select the subwoofer cut-off frequency: “off” (z), “125Hz” or “78Hz.”

AUX Level*2

To adjust the volume level for each connected auxiliary equipment. This setting negates the need to adjust the volume level between sources (page 11).

Adjustable level: “+18 dB” – “0 dB” (z) – “–8 dB”

*1 When tuner is selected as the source, the default setting is “off.”

*2 When AUX source is activated.

9