Capresso Avantgarde Series TIPS FOR BETTER COFFEE Height adjustable coffee-spout, Grinding

Models: Avantgarde Series

1 35
Download 35 pages 60.35 Kb
Page 31
Image 31

14.Empty the container underneath the steam nozzle and place it underneath the hot water spout (Fig.1,14).

15.Turn the Selector switch to the hot water position (Fig. 3,L). The machine will now pump fresh water in intervals through the hot water spout. MACHINE DE-SCALING

16.After a short while the machine will beep again. The display shows CLOSE TAP. Turn the selector switch (Fig. 3,L) back to the cup symbol. The machine will now pump fresh water in intervals into the used water tray inside. MACHINE DE- SCALING. After a short while the machine "beeps" and the display shows EMPTY TRAY/EMPTY GROUNDS.

17.Carefully remove the used water tray (Fig. 1,18), TRAY MISSING empty it and replace. The display shows PRESS RINSE.

18.Place a container under the coffee spout and press the

Rinse button. MACHINE RINSING.

SELECT PRODUCT

The machine will automatically remind you when it’s time to decalcify again.

19.TIPS FOR BETTER COFFEE Height adjustable coffee-spout

Adjust the height of the coffee-spout to the size of your cups.

Grinding

Please refer to chapter 7 "Adjusting the Grinder."

Pre-warm cups

You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important it is to warm your cups.

Sugar and cream

Warmth is lost by stirring the contents of the cup. Adding milk

or cream from the refrigerator considerably lowers the tempera- ture of the coffee.

20.ERROR MESSAGES / TROUBLESHOOTING ERROR MESSAGES:

The machine can display any of the following error messages:

ERROR 1, ERROR 3, ERROR 5

Call our customer service hot line 1-800-220-5701. Your machine needs to be returned for service.

ERROR 2, ERROR 4

Your machine is too cold. The heating sensor does not react.

Turn the machine off.

Keep the machine at normal room temperature (65º F or higher) for 2 hours .

Then turn it on again.

If display still shows ERROR 2 or ERROR 4 call customer service.

ERROR 6, ERROR 7, ERROR 8

Turn machine off, turn the main power switch off and unplug machine for a minute.

Turn machine on again. If the error message comes up again, try one more time.

If the message persists, call customer service.

TROUBLESHOOTING:

A. NO COFFEE COMES OUT OF THE COFFEE SPOUT Reason: Beans in bean container are not feeding properly into the grinder because they are stuck together.

30.

Page 31
Image 31
Capresso Avantgarde Series TIPS FOR BETTER COFFEE Height adjustable coffee-spout, Grinding, Pre-warm cups, Sugar and cream