Capresso Avantgarde Series warranty Manual Maintenance Cycles Rinse, Please note

coffee container onto the drawer, ground coffee will discharged onto the drawer.

TRAY MISSING

Insert the drawer complete with the empty used coffee container.

FILL BEANS

You must refill the bean container before you can brew coffee again. You can still dispense hot water or use the steam function.

SELECT PRODUCT / CLEAN MACHINE

After approx. 220 coffee brewings or 80 rinsing cycles you must run a tablet cleaning cycle. You can still make coffee, however we highly recommend to perform the cleaning cycle within the next few days (chapter 18).

SELECT PRODUCT / CLEAN NOW

After another 30 coffee brewings the message CLEAN MACHINE changes to CLEAN NOW.

SELECT PRODUCT / DE-SCALE MACHINE

It is time to decalcify the machine. You can still make coffee, however we highly recommend to perform the decalcifying cycle within the next few days.

Please note: this message should not appear if you use the Clearyl Filter Cartridge. If you use the cartridge and the message appears, then your cartridge function was not activated. Follow the instruction in chapter 14a to program and activate the Cartridge function. If the cartridge is already in use for several weeks install a new cartridge.

DE-SCALE NOW

It is really time to decalcify the machine. Don’t wait any longer.

SELECT PRODUCT / CHANGE FILTER

It is time to replace the Clearyl filter.

17.1 MANUAL MAINTENANCE CYCLES (RINSE)

The programming function RINSE lets you access the following maintenance programs, even if the machine does not prompt you: RINSE MACHINE, CLEAN MACHINE (Tablet Cleaning),

DE-SCALE MACHINE, CHANGE FILTER.

Please note:

•DE-SCALE MACHINE is not accessible if you are using the Clearyl Water filter and the function FILTER is set to YES.

•CHANGE FILTER is not accessible if the function FILTER is set to NO.

RINSE MACHINE

This program is useful if you used flavored coffee in connection with the pre-ground coffee button. One or two extra rinse cycles will remove any flavor transfer before brewing you next cup of flavor free coffee.

SELECT PRODUCT.

•Push and hold the Rotary Dial. FILTER.

•Turn the Rotary Dial until the display shows RINSE.

•Push the Rotary Dial and select RINSE MACHINE.

•Push the Rotary Dial. The machine will run a rinse cycle through the coffee spouts and will automatically return to

SELECT PRODUCT.

CLEAN MACHINE (tablet cleaning)

This program is useful if excessive oil build-up inside the machine slows the brewing process down.

SELECT PRODUCT.

•Push and hold the Rotary Dial. FILTER.

•Turn the Rotary Dial until the display shows RINSE.

26.