T) Programming
The Z5/Z6 provides programming, maintenance and
Push and hold the Rotary Dial until the Display shows FILTER. Turning the dial clockwise lets you access the func- tions listed below. To get back to COFFEE READY turn until the display shows EXIT and push the Rotary Dial. If you want to get into a function, push the Rotary Dial again, and sub- functions will appear. Turning the Dial will show you different options within the
Function
•
FILTER NO
•FILTER YES
•FILTER NO
Comment
Install and activate the Clearyl Filter
HARDNESS 10º DH | When not using the Clearyl cartridge, |
• Not active or | set the hardness to your water., |
• Six hardness levels | See chapter 24 Operating Instructions. |
|
|
MAINTENANCE |
|
• RINSE UNIT | Allows you to run extra cleaning |
• CAPPUCCINO | cycles, even if the Z5/Z6 does not |
CLEANING | prompt you to do so. |
•CHANGE FILTER
•CLEAN UNIT
•CAPPUCCINO RINSING
•DECALCIFY UNIT
TEMPERATURE |
|
• LOW | Change the temperature for each |
• NORMAL | coffee button, see chapter 26.2 |
• HIGH | Operating Instructions |
|
|
AROMA |
|
• XMILD | Change the coffee strength for |
• MILD | each coffee button. The amount of |
• NORMAL | ground coffee varies between approx. |
• STRONG | 5 and 16 grams. |
• XSTRONG |
|
|
|
CAPPUCCINO | Change the |
|
|
MILK | Change the |
|
|
ENERGY |
|
• SAVE NO | NO: Z5/Z6 is always ready |
• SAVE LEVEL 1 | Level 1: heats up for steam |
• SAVE LEVEL 2 | Level 2: heats up for water and steam |
|
|
TIME | Set actual time |
|
|