shows FILTER RINS. Do not interrupt. After 90 seconds the display shows UNIT IS HEATING then
COFFEE READY.
Q) Messages
Immediate Action Messages
FILL WATER TANK: add water to the water tank.
FILL BEANS: add beans to the bean container.
RINSE: push the Rinse Button. Hot water will come out of the Coffee Spouts and / or the ACS.
EMPTY GROUNDS or EMPTY TRAY: remove the drawer, empty the used coffee container (ground coffee) and the drawer (water). Replace all parts. IMPORTANT: If you pull out the drawer at any other time, you must empty the used coffee container and drawer. Otherwise you will create an overflow of used coffee. Never pull out the drawer during any operation. Always wait for COFFEE READY.
TRAY MISSING: replace the complete drawer assembly.
BIN MISSING: The tray, which holds the used cof- fee container, is missing. Make sure all four parts of the drawer system (drawer, tray, used coffee con- tainer and stainless steel grid) are inserted.
BEANCOVER MISSING: replace bean container lid.
Delayed Action Messages: In addition to COFFEE READY the Z5/Z6 will display another message. You can still brew beverages but you need to perform these functions as soon as possible:
COFFEE READY plus…
... CAPPU RINSE: (see chapter G)
... CLEAN: run a 15 minutes tablet cleaning cycle within the next few days. (see chapter R)
... FILTER CHANGE: (see chapter P)
... DESCALE: (see chapter S).
R) Tablet Cleaning Cycle
The message COFFEE READY CLEAN will appear after approx. 200 cups of coffee. This cleaning cycle removes coffee oils inside the machine. Takes less than 15 minutes.
Important: Only use special round cleaning tablet.
Important: Do not interrupt program once started! Fill water tank. Push and hold the Rinse Button. TRAY GROUNDS EMPTY. You must remove the drawer system for 20 seconds, even if it is empty. After emptying replace all parts. PRESS BUTTON.
