Carbine M9900DVDS manual Sirius Satellite Radio Operation Continued, Direct Tuning, station

Sirius Satellite Radio Operation (Continued)

Direct Tuning:

1.Push the TUNE knob until “DIRECT” appears in the display.

2.Rotate the TUNE knob and select the first digit (0 or 1).

3.Push the TUNE knob again.

4.Rotate the TUNE knob and select the second digit (1-8).

5.Push the TUNE knob again.

6.Rotate the TUNE knob and select the third digit (1-9). The tuner will start playing the station you have selected when the third digit stops flashing.

TUNE/TRACK/CH

PUSH

SCAN/S-MOD/SETUP

TUNE/TRACK/CH

PUSH

SCAN/S-MOD/SETUP

Preset Sirius Satellite Radio Stations

Programming Satellite Radio Stations: You can program up to 20 Sirius Satellite radio stations.

1.Select from SR1, SR2, SR3 or SR4 by pushing the BAND button repeatedly.

2.Tune to the desired radio station (see Sirius Satellite Radio Operation for more details).

3.Push and hold one of the five STATION RECALL buttons

BAND W-BND

until a short "beep" is heard. The corresponding preset button number now appears in the lower right hand corner of the display.

2

3	4	5
REPEAT	SHUFFLE	INTRO

4.To program additional preset stations, repeat this procedure using the other STATION RECALL buttons as desired.

Recalling Satellite Radio Stations:

1.Select from SR1, SR2, SR3 or SR4 by pushing the BAND button repeatedly.

2. Push button 1, 2, 3, 4 or 5 to recall a preprogrammed radio	2
station.

Automatically Recalling Satellite Radio Stations:

1.Select from SR1, SR2, SR3 or SR4 by pushing the BAND button repeatedly.

2.Push AS/PS button and release to automatically scan every 5 seconds the pre-programmed radio stations. To stop scanning push the AS/PS button again.

	BAND	W-BND
3	4	5
REPEAT	SHUFFLE	INTRO

BAND W-BND

MODE AS/PS

16