Carbine M9900DVDS manual Changing the Default Settings

Changing the Default Settings

The M9900DVDS has a small group of settings that can be changed to suit your personalized requirement.

Button Confirmation Beep: The factory default setting is BEEP ON (a confirmation beep every time a button or knob is pushed). To turn the beeps off, push and hold the VOLUME knob until “BEEP ON” is in the display then release. Rotate the VOLUME knob until “BEEP OFF” is in the display. Wait a few seconds, the radio will return to last radio mode selected.

VOLUME

PUSH SEL/

MENU

Power Up Volume Level: The factory default setting for initial power-up volume level is 12. To change the initial volume level, push and hold the VOLUME knob until “BEEP ON” is in the display then release. Push the VOLUME knob until “P-VOL” is in the display. Rotate the VOLUME knob until the desired initial volume is achieved. Wait a few seconds, the radio will return to last radio mode selected.

VOLUME

PUSH SEL/

MENU

Radio Frequency Display: The factory default setting is USA. Do not change this setting.

Clock Display When the Radio is Off: When the ignition key is on and the radio is off, “clock display on” is the default setting. To change the setting to “clock display off”, push and hold the VOLUME knob until “BEEP ON” is in the display then release. Push the VOLUME knob until “CLK ON” is in the display. Rotate the VOLUME knob until “CLK OFF” is in the display. Wait a few seconds, the radio will return to last radio mode selected.

VOLUME

PUSH SEL/

MENU

Display Priority: The factory default setting for display priority is “CLOCK” except in Sirius mode. To change the display priority (either radio frequency priority or no priority), push and hold the VOLUME knob until “BEEP ON” is in the display then release. Push the VOLUME knob until “CLOCK” is in the display. Rotate the VOLUME knob until “FREQ” or “NO PRI” is in the display. Wait a few seconds, the radio will return to last radio mode selected.

VOLUME

PUSH SEL/

MENU

Clock Type, 12 hour or 24 hour: The factory default setting is 12 hour clock with AM and PM indication. To change the clock type to 24 hour military time, push and hold the VOLUME knob until “BEEP ON” is in the display then release. Push the VOLUME knob until “12 HOUR” is in the display. Rotate the VOLUME knob until “24 HOUR” is in the display. Wait a few seconds, the radio will return to last radio mode selected.

VOLUME

PUSH SEL/

MENU

24