Carrier 19XR installation instructions SI kg

Table 8B Ð 19XR Waterbox Cover Weights

SI (kg)

HEAT	WATERBOX	FRAME 1		FRAME 2				FRAME 3
EXCHANGER	DESCRIPTION	Standard	Flanged	Standard	Flanged			Standard	Flanged
		Nozzles		Nozzles				Nozzles
	NIH, 1 Pass Cover, 150 psig	80	93	145		159	145		159
	NIH, 2 Pass Cover, 150 psig	84	99	145		159	145		159
	NIH, 3 Pass Cover, 150 psig	82	89	136		154	140		154
COOLER/	NIH/MWB End Cover, 150 psig	62	62	136		136	136		136
CONDENSER	NIH, 1 Pass Cover, 300 psig	112	137	186		220	186		220
	NIH, 2 Pass Cover, 300 psig	116	147	186		235	186		235
	NIH, 3 Pass Cover, 300 psig	115	131	196		212	196		212
	NIH/MWB End Cover, 300 psig	79	79	181		181	181		181
HEAT	WATERBOX	FRAME 4		FRAME 5				FRAME 6
EXCHANGER	DESCRIPTION	Standard	Flanged	Standard	Flanged			Standard	Flanged
		Nozzles		Nozzles				Nozzles
	NIH, 1 Pass Cover, 150 psig	220	236	279		296	364		380
	NIH, 2 Pass Cover, 150 psig	221	245	268		301	349		382
	NIH, 3 Pass Cover, 150 psig	229	236	285		297	371		381
COOLER/	NIH/MWB End Cover, 150 psig	172	172	194		194	265		265
CONDENSER	NIH, 1 Pass Cover, 300 psig	269	303	347		381	399		434
	NIH, 2 Pass Cover, 300 psig	269	318	345		398	383		451
	NIH, 3 Pass Cover, 300 psig	282	298	361		380	409		432
	NIH/MWB End Cover, 300 psig	258	258	323		323	378		378
HEAT	WATERBOX	FRAME 7 COOLER		FRAME 7 CONDENSER
EXCHANGER	DESCRIPTION	Standard	Flanged	Standard	Flanged
		Nozzles		Nozzles
	NIH, 1 Pass Cover, 150 psig	631	666	547		582
	NIH, 2 Pass Cover, 150 psig	610	663	528		580
	NIH, 3 Pass Cover, 150 psig	650	667	554		581
COOLER/	NIH/MWB End Cover, 150 psig	464	464	417		417
CONDENSER	NIH, 1 Pass Cover, 300 psig	900	975	767		840
	NIH, 2 Pass Cover, 300 psig	877	986	738		845
	NIH, 3 Pass Cover, 300 psig	911	948	777		831
	NIH/MWB End Cover, 300 psig	711	711	872		872
HEAT	WATERBOX	FRAME 8 COOLER		FRAME 8 CONDENSER
EXCHANGER	DESCRIPTION	Standard	Flanged	Standard	Flanged
		Nozzles		Nozzles
	NIH, 1 Pass Cover, 150 psig	831	866	763		798
	NIH, 2 Pass Cover, 150 psig	789	859	721		791
	NIH, 3 Pass Cover, 150 psig	840	866	772		799
COOLER/	NIH/MWB End Cover, 150 psig	671	671	557		557
CONDENSER	NIH, 1 Pass Cover, 300 psig	1220	1295	1086		1156
	NIH, 2 Pass Cover, 300 psig	1177	1326	1029		1169
	NIH, 3 Pass Cover, 300 psig	1224	1298	1096		1147
	NIH/MWB End Cover, 300 psig	653	653	802		802

LEGEND

NIH Ð Nozzle-in-Head

MWB Ð Marine Waterbox

NOTE: Weight for NIH 2-Pass Cover, 150 psig is included in the heat exchanger weights shown in Table 6.

NOTE: If the cooler and condenser vessels must be sepa- rated, the heat exchangers should be kept level by placing a support plate under the tube sheets. The support plate will also help to keep the vessels level and aligned when the ves- sels are bolted back together.

NOTE: Wiring must also be disconnected. Label each wire before removal (see Carrier Certi®ed Prints). In order to dis- connect the starter from the machine, remove wiring for the oil pump, oil heater, control wiring at the power panel, and the main motor leads at the starter lugs.

Remove all transducer and sensor wires at the sensor. Clip all wire ties necessary to pull heat exchangers apart.

To Separate Cooler and Condenser:

1.Place a support plate under each tube sheet to keep each vessel level (Fig. 6, Item 6).

2.Cut the refrigerant motor cooling line at the location shown (Fig. 6, Item 7).

13