Carrier 336, 338, 339 - page 21

17
Models 336, 338 & 339 Operating Procedures
Figure 23
Step 4
Place the power switch in the “ON” position.
Figure 24
Step 5
Press the “WASH” button. This will cause the
sanitizing solution in the freezing cylinder to agitat e.
Allow it to agitate for five minutes.
Figure 25
Step 6
Place an empty pail beneath the door spout and raise
the prime plug.
Figure 26
Step 7
When a steady stream of sanitizing solution is f lowing
from the prime plug opening in the bottom of the
freezer door, lower the draw handle. Draw off all the
sanitizing solution.
Figure 27
Note: Momentarily pull the center draw handle down
to sanitize the center door spout.
Step 8
Once the sanitizer stops flowing from the door spout,
raise the draw handle and press the “WASH” button,
cancelling the beater motor operation.
Note: Youhave just sanit ized the freezer. Be
sure your hands are sanitized before continuing
these instructions.