O Warmer & Cooler Commands in Manual Changeover
If the thermostat is configured for Manual Heat/Cool changeover:
COOLER button press while in Cool or Off mode:
When the thermostat receives a Cooler command (button press) through the remote control and the air conditioner is not running, the set point will be lowered below the room temperature to start the cooling operation. This occurs even if the thermostat was Off.
When the thermostat receives a Cooler command and the air conditioning is running, the set point will be lowered 2 degrees below the present set point.
Cooler button press while in Heat mode:
When the thermostat receives a Cooler command (button press) through the remote control, and the heater is running, the set point will be lowered to the present room temperature which will turn off the heater.
If the Cooler button is pressed and the heater is not running, the set point will be lowered 2 degrees.
Page 5
