Carrier Compressor and Condensing Unit

Manufacturer reserves the right to discontinue, or change at any time, specificat ions or designs without notice and without incurrin g obligations.

PC 802 Catalog No. 530-601 Printed in U.S.A. Form 06/07E-1SI Pg 20 5-01 Replaces: 06E,07E-9SI

Book2244

Tab 1b2a2b3a

Contents

Main Installation, Start-Up and Service Instructions Hermetic, Water-Cooled CONTENTS SAFETY CONSIDERATIONS INSTALLATION Receive and Inspect Unit Piping Connections Electrical Connections Fig. 2 07E Water-Cooled Condensing Units DIMENSIONS (in.) NOTE: Recommended service space is 3 ft-0 in. at compressor motor end to allow for motor removal. DIMENSIONS (in.) 460,575 501/435 367/811/2271/2119 Fig. 3 06E Hermetic Compressor Units Fig. 4 06E Compressors Table 1 Electrical Data Compressor Motor With Circuit Breaker Fig. 5 Component Location Fig. 6 Control Circuit Wiring for 06E/07E Units PRE-START-UP Evacuate, Dehydrate, and Leak Test Oil Charge (See Tables 2 and 3) START-UP Start Compressor Timer Functions SERVICE Protection Devices Compressor Thermal Protection Capacity Control System Removing, Inspecting and Replacing Components (Fig. 11) Page LEGEND Fig. 11 Compressor Components (06E Shown) Lubrication System Cylinder Heads (See Fig. 11) Pressure Relief Valve Suction and Discharge Valve Plate Assembly Terminal Plate Assembly Compressor Running Gear Removal Compressor Running Gear Replacement Motor Removal Motor Replacement Motor Burnout (Clean-Up Procedure) Condenser Maintenance (07E Units) Fig. 24 Gravity Circulation Fig. 25 Forced Circulation