TB---PAC

TB---PHP

Base Series Programmable Thermostats

Homeowner’s Guide

Designed and Assembled

in the USA.

A07107

Base Series Programmable Thermostat

SETTING TIME AND DAY

At Power Up

When power is first applied, AC or HP will appear for 5 seconds to tell you it is an air conditioner (AC) or a heat pump (HP) model. After this, the time display will flash to tell you the power has been off.

Setting The Current Time:

1.Press the TIME/TEMP button. SET TIME flashes on the display.

2.Press the UP or DOWN button until the correct time is dis- played.

3.To quickly advance to the proper time, press and hold the UP or DOWN button.

4.When the correct time appears on the display, press the HOLD/END button.

NOTE: If you choose not to press the HOLD/END button, the thermostat will automatically exit the time setting mode after 10 seconds.

Setting The Current Day:

1.Press the DAY button to advance to the correct day.

2.When the correct day appears on the display, press the HOLD/END button.

MANUAL OPERATION

To Operate Manually (Without the Programmed Comfort Schedule):

Press the HOLD/END button to make the HOLD icon appear. Then follow the four steps below:

1.To Select the Mode:

Use the H/C button to move between the choices. OFF, HEAT, COOL, or EMHT will appear on the display. EMHT will only appear on heat pump models.

2.To Select the Fan Operation:

Use the FAN button to move between continuous fan (in- dicated by the FAN ON icon) and auto fan operation.

3.To Read the Room Temperature:

The large display reads room temperature until a button is pressed.

4.To Adjust the Setpoint:

In normal operation, the large display shows room temper- ature. At the first press of the UP or DOWN button, the large display shows the current setpoint and the SET TEMP icon is turned on. Further presses of the UP or DOWN but- ton adjust the setpoint upward or downward. Five seconds after the last button press, the display returns to the room temperature and the SET TEMP icon turns off.

PROGRAMMED OPERATION

Introduction

The Base Series Programmable Thermostat provides four periods per day (MORNING, DAY, EVE, NIGHT) and two schedules per week (MoTuWeThFr and SaSu). A separate time, heat setpoint, and cool setpoint can be set for each period and schedule. Before starting to actually program the thermostat, fill out Table 1 with the values you wish to program. (The Energy Starr, US Department of Energy recommended time and temperature values are already programmed for you as a starting point and are shown on the left side of the table.)

The first press of the PROGRAM button brings up the programming mode and places you at morning of the current day and period. Successive presses move you between the four daily periods.

While Programming:

The TIME/TEMP button moves between three selections of SET TIME, SET TEMP & HEAT, and SET TEMP & COOL. These three numbers are to be programmed for each of the periods MORNING, DAY, EVE, and NIGHT.

The DAY button moves between the weekdays, (MoTuWeThFr) and the weekend (SaSu) selections. A different schedule may be set for the weekdays and the weekend. You may exit programming at any time by pressing the HOLD/END button.

Page 4 Page 6
Page 5
Image 5
Carrier TB-PAC, TB-PHP Homeowner’s Guide, Setting Time and DAY, Manual Operation, Programmed Operation
Page 4 Page 6

TB-PAC, TB-PHP specifications

Carrier TB-PHP and TB-PAC are effective solutions designed to meet the demands of modern heating and cooling applications. These units offer impressive performance, energy efficiency, and innovative technologies, making them a favorite choice for residential and commercial spaces.

The TB-PHP is a heat pump system that provides both heating and cooling capabilities, offering an economical solution for maintaining comfort throughout the year. One of its key features is the inverter technology, which allows the system to adjust its output based on current load requirements. This results in energy savings and enhanced comfort levels, as the temperature is maintained consistently without the fluctuations commonly associated with conventional systems.

Another notable characteristic of the TB-PHP is its exceptional seasonal efficiency rating. With its advanced design, this heat pump offers high SEER (Seasonal Energy Efficiency Ratio) and HSPF (Heating Seasonal Performance Factor) ratings, ensuring that users benefit from lower energy bills while also reducing their environmental footprint. The unit's low noise levels enhance its appeal, making it suitable for residential spaces where quiet operation is valued.

Complementing the TB-PHP is the TB-PAC series, which is a packaged air conditioning system designed for easy installation and operation. The TB-PAC features a compact design that allows for space-saving installation, making it ideal for urban settings or properties with limited outdoor space. The robust construction of the unit promotes durability, ensuring that it can withstand a range of environmental conditions.

In terms of technology, both the TB-PHP and TB-PAC are equipped with intelligent controls that facilitate easy monitoring and management of system performance. Users can access diagnostics, settings, and maintenance alerts, contributing to effective system operation and longevity. Additionally, the units support various refrigerants, adhering to environmental standards while maximizing efficiency.

Overall, the Carrier TB-PHP and TB-PAC are distinguished by their advanced technologies, energy efficiency, and user-friendly features. The combination of innovative engineering and commitment to sustainability positions these systems as top contenders in the heating and cooling market, providing comfort and reliability for users across different environments.
Top Page Image Contents