Adit | Carrier Access 3104s instruction

Adit 3104

QUICK START GUIDE

Part Number: 002-0219-0410

Product Release: 1.6

September 2007

Image 1

Carrier Access 3104s quick start Adit

Contents

Adit Page Quick Start Guide Installation Environment Electrostatic Discharge ESD PrecautionsUnpacking and Inspection Installation User Safety Ferrite Beads Compliant InstallationFerrite bead shipped with Adit chassis Wall Mounting To rack mount the Adit 3000, follow the instructions below Rack Mounting Optional Feature Tray Slide Adit 3104, 3200 and 3400 Battery Backup Front Chassis OverviewBack Front of Adit Interface ConnectorsBack of Adit Grounding the Unit Battery Connection PowerTo connect AC power To connect -48 VDC power Pair Pin Function Color Code Pair Telco Connector Description RS-232 Craft Port Female DB-9Direction DS1/E1 RJ-48C DS1/E1 Connection PortsPin Name Description State Description 10/100Base-TX Ethernet Reset ButtonEthernet RJ-45 Alarm/Status LEDs Command Description To access the management consoleWeb-Based Management #show interface ethernet 2 Eth WAN Set the New-line/Transmit value CR+LF Setting up a CLI Connection Log Adit 3104 show version Key Enabled Software Features Setup Adit for access via Web-Browser Basic Configuration Select Restore Defaults Restore Factory Defaults Modify Default Admin User Quick Start Web-browser Configure Ethernet WAN Interface Select Apply to apply the new settings Set Network to WAN Configure Serial1 as WAN Select the Enable button Select Use SIP Proxy Configure the Adit 3104 as a SIP Line Gateway Quick Start Quick Start Basic Configuration Adit 3104 Release