Restore Factory Defaults | Carrier Access 3104s guide

Quick Start

Basic Configuration

Restore Factory Defaults

If the unit is not out-of-the-box, you may want to verify that the unit is set to defaults. Note: this will reset the IP address back to the default setting of 192.168.1.1.

In the web-browser:

zSelect Advanced from the Navigation bar

zSelect Restore Defaults

zSelect OK to restore defaults

24	Adit 3104 - Release 1.6

Image 24

Carrier Access 3104s quick start Restore Factory Defaults, Select Restore Defaults

Contents

Adit Page Quick Start Guide Electrostatic Discharge ESD Precautions Installation EnvironmentUnpacking and Inspection User Safety Installation Compliant Installation Ferrite BeadsFerrite bead shipped with Adit chassis Wall Mounting Rack Mounting Optional Feature To rack mount the Adit 3000, follow the instructions below Tray Slide Adit 3104, 3200 and 3400 Battery Backup Chassis Overview FrontBack Interface Connectors Front of AditBack of Adit Grounding the Unit Power Battery ConnectionTo connect AC power To connect -48 VDC power Pair Telco Connector Pair Pin Function Color Code RS-232 Craft Port Female DB-9 DescriptionDirection DS1/E1 Connection Ports DS1/E1 RJ-48CPin Name Description State Description Reset Button 10/100Base-TX EthernetEthernet RJ-45 Alarm/Status LEDs To access the management console Command DescriptionWeb-Based Management #show interface ethernet 2 Eth WAN Setting up a CLI Connection Set the New-line/Transmit value CR+LF Log Key Enabled Software Features Adit 3104 show version Basic Configuration Setup Adit for access via Web-Browser Restore Factory Defaults Select Restore Defaults Modify Default Admin User Quick Start Configure Ethernet WAN Interface Web-browser Select Apply to apply the new settings Configure Serial1 as WAN Set Network to WAN Select the Enable button Configure the Adit 3104 as a SIP Line Gateway Select Use SIP Proxy Quick Start Quick Start Basic Configuration Adit 3104 Release