TROUBLESHOOTING

 

 

POSSIBLE CAUSES

SOLUTIONS

UNIT DOES NOT START

 

• Unit may have become unplugged

• Check that plug is securely in wall receptacle.

• Fuse may have blown

• Replace the fuse. See Note 1.

• Circuit breaker may have been tripped

• Reset circuit breaker. See Note 1.

• Unit mode dial may be set to the OFF position

• Switch mode dial to an operating mode.

UNIT NOT COOLING/HEATING ROOM

 

• Unit air discharge section is blocked

• Make sure that curtains, blinds or furniture are not restricting or

 

blocking unit airflow.

• Temperature setting is not high or low enough

• Reset to a lower or higher temperature setting.

•Unit air filters are dirty

•Room is excessively hot or cold when unit is started • Allow sufficient amount of time for unit to heat or cool the room. Start heating or cooling early before outdoor temperature, cooking heat or gatherings of people make room uncomfortable.

•Vent door left open• Close vent door.• Remove and clean filters.

UNIT MAKING NOISES

• Clicking, gurgling and whooshing noises are normal during opera-

 

tion of unit.

WATER DRIPPING OUTSIDE

• If a drain kit has not been installed, condensation run-off during

 

very hot and humid weather is normal. See Note 2. If a drain kit

 

has been installed and is connected to a drain system, check

 

gaskets and fittings around drain for leaks and plugs.

WATER DRIPPING INSIDE

 

• Wall sleeve is not installed level

• Wall sleeve must be installed level for proper drainage of conden-

 

sation. Check that installation is level and make any necessary

 

adjustments.

ICE OR FROST FORMS ON INDOOR COIL

 

• Low outdoor temperature

• When outdoor temperature is approximately 55 F or below, frost

 

may form on the indoor coil when unit is in Cooling mode. Switch

 

unit to FAN operation until ice or frost melts.

• Dirty filters

• Remove and clean filters.

NOTES:

1.If circuit breaker is tripped or fuse is blown more than once, contact a qualified electrician.

2.If unit is installed where condensation drainage could drip in an undesirable location, an accessory drain kit should be installed and connected to drain system.

13

Page 12 Page 14
Page 13
Image 13
Carrier Access 52C owner manual Troubleshooting, Possible Causes Solutions Unit does not Start
Page 12 Page 14

52C specifications

The Carrier Access 52C is a versatile, high-performance telecommunications device designed for service providers seeking to deliver robust connectivity solutions. This compact access platform seamlessly bridges the gap between various communications protocols, enabling carriers to efficiently manage bandwidth and optimize their service offerings.

One of the standout features of the Carrier Access 52C is its multi-service capabilities. It supports T1/E1 and DS3 traffic, making it suitable for both traditional and modern network environments. This flexibility allows carriers to tailor their services to meet diverse customer needs, whether they are delivering voice, data, or video services.

The device integrates advanced technologies, including digital signal processing (DSP) and embedded service aggregation. This ensures that the Carrier Access 52C can handle high bandwidth demands while maintaining low latency and high reliability. The DSP technology enhances the overall efficiency of data processing, which is critical for service providers looking to optimize their networks.

An additional key characteristic of the Carrier Access 52C is its scalability. The modular design allows for easy upgrades and expansions, enabling service providers to increase capacity as demand grows. This future-proofing aspect is crucial in a competitive landscape where technology and user requirements continually evolve.

Security features are also a significant focus of the Carrier Access 52C. The device offers comprehensive security protocols to protect against unauthorized access and data breaches. This is particularly important for carriers who must ensure the integrity and confidentiality of their customer transactions.

Operational efficiency is further enhanced through its user-friendly management interface. The Carrier Access 52C supports remote management and monitoring capabilities, which facilitate real-time system checks and configuration adjustments. This reduces the need for on-site visits and allows for quicker response times to issues, ultimately improving overall service delivery.

In summary, the Carrier Access 52C stands out in the telecommunications market due to its multi-service capabilities, advanced technology integration, scalability, robust security features, and user-friendly management. It is an ideal solution for carriers looking to enhance their service offerings and meet the ever-increasing demands of today's digital landscape. With its comprehensive features and characteristics, the Carrier Access 52C continues to be a reliable choice for telecommunications professionals.
Top Page Image Contents