Carrier Access KTA user manual Fill in IP

After network connection, please pick up handset, press key “#*047#” to hear IP address of the adaptor box. In the address field of browser, type the IP address and press ENTER to display the Settings page. A log-in page will be shown. Enter log-in password to set parameters. The default password is 1234.

If adaptor box cannot get IP, enter “##3427# to cancel DHCP mode. After reset and beep sound heard, please pick up the handset, enter “#73847#xxx*xxx*xxx*xxx#” to set IP address of adaptor box. Get the IP address and use browser to set up.

¾Network Settings

Depending on the requirement of your ISP or Network you can configure the KTA with a Static IP, DHCP, or PPPoE:

Static IP: If your ISP / Network requires the use of a Static IP then you will be required to complete all of the parameters listed below:

Fill in IP	Fill in subnet mask	Fill in default
		gateway ip

6