Cary Audio Design SPECIFICATIONS SLP-308Stereo Tube Preamplifier, Front Panel Features

SPECIFICATIONS: SLP-308 Stereo Tube Preamplifier

Dimensions: 17 1/8” W x 4 _” H x 14” D (~ 44 cm x 11.4 cm x 35.5 cm)

Weight: 15 lb. ( 6.8 kg)

Circuit: Class A Triode

Frequency Response: 9 Hz - 140 kHz + 0, - 3 dB

THD @ rated output: 0.02% (750 mV rated output, 12 volts maximum)

Input Impedance: 100,000 ohms resistive (100 K Ω)

Output Impedance: 440 ohms ( 440 Ω)

Gain: 12 dB

Signal/Noise Level: -88 dB

Resistors: 1 % metal film

Capacitors: Film and foil output caps, 5 micro farad (5 μFd)

Power Transformer: 200% continuous commercial duty cycle

Tubes: 2- 12AU7 dual triodes

Power Supply: Full wave rectification, center-tapped, pi-network with filter choke, fully regulated

AC Power Requirements: 100 – 130 volts AC / 50-60 Hz at 24 watts 200 – 245 volts AC / 50-60 Hz at 24 watts

Internal Wiring: EE Teflon dielectric Silver wire

Warm-up Time: 5 minutes (1 minute auto mute)

Input and Output Jacks: Gold plated with Teflon dielectric inserts

Duty Cycle: Continuous duty 24 hours per day

This section describes the basic specifications of the SLP-308 at the time of printing. Specifications are subject to change or improvement without notice or obligation.

FRONT PANEL FEATURES