Cary Audio Design SLP 03 owner manual Controls and Displays, Front Panel

CONTROLS AND DISPLAYS

FRONT PANEL

1.POWER

•Press once to turn the power ON.

•Press again to turn the power OFF. The amplifier will enter STANDBY and the blue POWER LED will light.

2.HEADPHONE JACK

•This jack is used to listen to headphones.

3.SOURCE SELECTOR

•The input source is selected by pressing the respective buttons.

4.ALPHANUMERIC Display

•This thirteen-character display provides a wide range of information concerning the operation of the SLP 03. The information displayed depends on what the SLP 03 is doing.

•The information displayed is summarized below:

Normal Operation: Displays the selected input name and volume setting.

Balance Mode: This shows the direction (L or R) and magnitude of the balance offset, from channel to channel.

5.VOLUME

•Use the volume control to adjust the listening level.

6.POWER INDICATOR (Standby)

•This indicator lights when the amplifier is switched into standby mode.

9