Casablanca Fan Company 38546Z Crossbar Mountiing Bracket Installation, Canopy/Glass Hardware

CROSSBAR MOUNTIING BRACKET INSTALLATION

Proceed with installation as follows:

Step 1. Route the wires from the ceiling outlet box through the crossbar mounting bracket center hole. Attach the bracket, with ground wire and ridges down, to the ceiling fixture outlet box with the mounting hardware included with the outlet box.

Tighten the screws firmly by hand only, being careful not to bend the bracket by over tightening.

CAUTION: To reduce the risk of personal injury, use only the mounting hardware provided with the approved outlet box to install the crossbar mount- ing bracket.

ceiling
fan
approved
outlet	ridge
box
ceiling	side
	down
wiring
crossbar
mounting
bracket	green
	ground
flat	wire
washer
	outlet box
	mounting
	hardware

CANOPY/GLASS HARDWARE

CANOPY SCREW

(4)

CANOPY LOCK WASHER (4)

CANOPY	CANOPY		HALOGEN BULB	BODY TOP
HATCH		GLASS SHADE	100 Watt	COVER

CANOPY INSTALLATION

Step 2. Attach the canopy to the crossbar mount- ing bracket with three of the 8-32 x 21/4″ long canopy screws and canopy lock washers.

Tighten the screw firmly by hand only.

Note: On sloped ceilings, align the canopy opening towards the top or room peak.

crossbar mount-

ing

bracket installed

canopy

canopy lock

washers

canopy screws

4